80-550-170-62L-000-30-00 CLES5500HT Drawing
- Version
- Download 2383
- File Size 461.45 KB
- File Count 1
- Create Date February 7, 2018
- Last Updated February 14, 2018
80-550-170-62L-000-30-00 CLES5500HT Drawing
| General Size | 5 1/2" |
| Max Torque | 17000 ft.lb. |
| Tong Type | CLES5500HT |
| Top Level P/N | 80-550-170-62L-000-30-00 |
| General Configuration Description | Tong + 6.25 Lockjaw BU (Compression) |
| Weight | 1600 lbs |
| Tong Jaws | 2-1/16 To 5-1/2 |
| Jaw/Die Series | CJ-51A CJ-LF-51A CJDT51-XXXXX CJDT-LF-51-XXXXX |
| Backup Jaws | 2-1/16 To 6-1/4 |
| Jaw/Die Series | (2)BUCS6250XXXX (1)BUCS6251XXXX (2)BB6250XXXX (1)BB6251XXXX |
| Torque / Turns | |
| Hydraulic Load Cell Assembly (Load cell + Hose + Gage) |
SM20-29C |
| System Arm Length (in) (T) = Tong (B) = Backup |
29 (B) |
| WINCATT | |
| Turns Ratio (see note 1) |
0.00077083333333 |
| Encoder Mount | 51074 |
| Encoder (Pulses per revolution of encoder shaft) |
60-0072 (200) |
| Proximity Switch | |
| CPT (Counts/Turn) of Rotary Gear Based on > 1000 PPT |
1320 |
| LC/SH Combo. | MHA-030 |
| Spring Hanger | SH-030 |
| Lift Cylinder | LCR-045 |
| Valve Layout (Order of valve function from left to right as viewed by operator) |
Motor-BU-Lift |
| Notes: |
| 1 - Ratio of One full rotation of Rotary Gear to number of rotations of encoder shaft |
| 1:XX (A) = Rotary Idler, encoder mount, 6 tooth rubber gear |
| 1:XX (B) = Pinion |
| 1:XX (C) = SL4500 - Reduction Gear, encoder mount, 12 tooth steel gear" |