80-550-250-620-000-30-00 CLE5500-15 Drawing
- Version
- Download 2430
- File Size 505.99 KB
- File Count 1
- Create Date February 7, 2018
- Last Updated February 14, 2018
80-550-250-620-000-30-00 CLE5500-15 Drawing
| General Size | 5 1/2" |
| Max Torque | 25000 ft.lb. |
| Tong Type | CLE5500-15 |
| Top Level P/N | 80-550-250-620-000-30-00 |
| General Configuration Description | Tong + 6.25 BU (Compression) |
| Weight | 2830 lbs |
| Tong Jaws | 2-3/8 To 5-1/2 |
| Jaw/Die Series | CJ-55B CJ-LF-55B CJDT55-0XXXX |
| Backup Jaws | 2-3/8 To 6-1/4 |
| Jaw/Die Series | BUC7625XXXX BB7625XXXX BUDT76-0XXXXA |
| Torque / Turns | |
| Hydraulic Load Cell Assembly (Load cell + Hose + Gage) |
SM25-28-C |
| System Arm Length (in) (T) = Tong (B) = Backup |
28 (B) |
| WINCATT | |
| Turns Ratio (see note 1) |
0.00090138888889 |
| Encoder Mount | 51074 |
| Encoder (Pulses per revolution of encoder shaft) |
60-0068 (100) |
| Proximity Switch | |
| CPT (Counts/Turn) of Rotary Gear Based on > 1000 PPT |
1788 |
| LC/SH Combo. | MHA-030 |
| Spring Hanger | SH-030 |
| Lift Cylinder | LCR-045 |
| Valve Layout (Order of valve function from left to right as viewed by operator) |
Motor-BU-Lift |
| Notes: |
| 1 - Ratio of One full rotation of Rotary Gear to number of rotations of encoder shaft |
| 1:XX (A) = Rotary Idler, encoder mount, 6 tooth rubber gear |
| 1:XX (B) = Pinion |
| 1:XX (C) = SL4500 - Reduction Gear, encoder mount, 12 tooth steel gear" |