Continuous Short Stroke
bucking units
The continuous short stroke bucking unit is used for the make-up or break-out of tool assemblies which have varying diameters and lengths. The tong and backup spacing can be adjusted from a few inches to many feet.
Compare
All Continuous Short Stroke bucking units
- Maximum Torque
- Minimum Calibrated Torque
- Minimum Pipe Size OD
- Maximum Pipe Size OD
- Tong Configuration
- Backup Configuration
- Backup Compliance
- Notes
- 35,000 lbf⋅ft (47,453 N·m)
- 1,500 lbf⋅ft (2,034 N·m)
- 2.063 in. (51 mm)
- 11.75 in. (279 mm)
- Closed
- Hinged
- Floating
- Also available in a 50,000 lbf⋅ft (67,791 N·m) configuration.||Since the nature of our bucking units allow for multiple lengths, the overall lengths and weights will vary with configuration.
- 50,000 lbf·ft (67,791 N·m) / 100,000 lbf·ft
- 1,500 lbf⋅ft (2,034 N·m)
- 2.063 in. (51 mm)
- 15 in. (381 mm)
- Closed
- Hinged
- Floating
- Also available in a 100,000 lbf⋅ft (135,582 N·m) configuration||Since the nature of our bucking units allow for multiple lengths, the overall lengths and weights will vary with configuration
- 100,000 lbf·ft (135,582 N·m) / 50,000 lbf-ft / 120,000 lbf-ft
- 1,500 lbf⋅ft (2,034 N·m)
- 2.375 in. (51 mm)
- 23 in. (584 mm)
- Closed
- Hinged
- Floating
- Since the nature of our bucking units allow for multiple lengths, the overall lengths and weights will vary with configuration