14”
Models
The CLE14000 casing tong is an open-throat design that can handle tubulars as large as 14" in diameter. The system features two jaws in the tong and three jaws in the backup, which encircle the pipe. Wraparound jaws and dies, combined with our low-friction jaw technology, constant radial load cam system, and compensating jaw design, provide exceptional gripping capabilities with reduced pipe deformation, stress, and marking. Using our non-marking aluminum die system or GRITFACE® Dies in the tong and backup will allow stainless steel corrosion-resistant alloy (CRA) to be run as quickly and easily as traditional tongs run conventional steel tubulars.
Compare
All 14” Models
- Minimum Tong Size OD
- Maximum Tong Size OD
- Backup Minimum Tong Size OD
- Backup Maximum Tong Size OD
- Maximum Torque
- Part Option
- (Tong only)
- Part Number
- 80-140-500-000-000-30-00
- 7 in. (178 mm)
- 14 in. (356 mm)
- N/A
- N/A
- 50,000 lbf·ft (67,791 N·m)
- Part Option
- (Tong with Lockjaw™ 15000 Backup)
- Part Number
- 80-140-500-15L-000-30-00
- 7 in. (178 mm)
- 14 in. (356 mm)
- 7 in. (178 mm)
- 15 in. (381 mm)
- 50,000 lbf·ft (67,791 N·m)
- Part Option
- (Tong with Lift Section)
- Part Number
- 80-1001-10
- 4.5 in. (102 mm)
- 14.375 in. (356 mm)
- NA
- N/A
- 75,000 lbf·ft (101,686 N·m)
- Part Option
- (Tong with Lift Section and Closed Center)
- Part Number
- 80-1001-29
- 4.5 in. (102 mm)
- 14.375 in. (356 mm)
- 75,000 lbf·ft (101,686 N·m)
- N/A
- N/A
- Part Option
- (Tong with Lockjaw™ Backup)
- Part Number
- 80-1001-23
- 4.5 in. (102 mm)
- 14.375 in. (356 mm)
- 4.5 in. (102 mm)
- 15 in. (381 mm)
- 75,000 lbf·ft (101,686 N·m)
- Part Option
- (Tong with Remote and Lockjaw™ 15000 Backup)
- Part Number
- 80-140-100-15D-001-30-00
- 7 in. (178 mm)
- 14 in. (356 mm)
- 7 in. (178 mm)
- 15 in. (381 mm)
- 100,000 lbf·ft (135,582 N·m)
- Part Option
- (Tong with Lockjaw™ 15000 Backup)
- Part Number
- 80-140-100-15D-001-3S-S1
- 7 in. (178 mm)
- 14 in. (356 mm)
- 7 in. (178 mm)
- 15 in. (381 mm)
- 100,000 lbf·ft (135,582 N·m)