7-5/8”
Models
The CLE7625UHT casing tong is an open-throat design that can handle tubulars as large as 7-5/8" in diameter. The system features two jaws in the tong and three jaws in the backup, which encircle the pipe. Wraparound jaws and dies, combined with our low-friction jaw technology, constant radial load cam system, and compensating jaw design, provide exceptional gripping capabilities with reduced pipe deformation, stress, and marking. Using our non-marking aluminum die system or GRITFACE® Dies in the tong and backup will allow stainless steel corrosion-resistant alloy (CRA) to be run as quickly and easily as traditional tongs run conventional steel tubulars.
The CLE7625UHT with BUC7625UHT is for use when running small-diameter casing and large-diameter production strings.
Compare
All 7-5/8” Models
- Minimum Tong Size OD
- Maximum Tong Size OD
- Backup Minimum Tong Size OD
- Backup Maximum Tong Size OD
- Maximum Torque
- Part Option
- (Tong with 8625 Backup)
- Part Number
- 80-760-300-860-000-30-00
- 2.375 in. (51 mm)
- 7.625 in. (178 mm)
- 2.375 in. (51 mm)
- 8.625 in. (203 mm)
- 30,000 lbf·ft (40,675 N·m)
- Part Option
- (Tong with 8625 Backup and Chromemaster™)
- Part Number
- 80-760-30C-86T-000-50-00
- 2.375 in. (51 mm)
- 7.625 in. (178 mm)
- 2.375 in. (51 mm)
- 8.625 in. (203 mm)
- 30,000 lbf·ft (40,675 N·m)
- Part Option
- (Lockjaw™ Tong with Lockjaw™ 7625 Backup)
- Part Number
- 80-760-30L-76D-111-6S-00
- 2.375 in. (51 mm)
- 7.625 in. (178 mm)
- 2.375 in. (51 mm)
- 7.625 in. (178 mm)
- 30,000 lbf·ft (40,675 N·m)