80-860-850-000-111-00-01 CLE8625DP Drawing
- Version
- Download 1938
- File Size 466.27 KB
- File Count 1
- Create Date February 7, 2018
- Last Updated February 14, 2018
80-860-850-000-111-00-01 CLE8625DP Drawing
| General Size | 8 5/8" |
| Max Torque | 85000 ft.lb. |
| Tong Type | CLE8625DP |
| Top Level P/N | 80-860-850-000-111-00-01 |
| General Configuration Description | Tong Only (Remote) |
| Weight | 2700 lbs |
| Tong Jaws | 3-1/8 To 8-5/8 |
| Jaw/Die Series | CJ-86A CJDT76-0XXXX CJ-LF-76D CJDT86-0XXXX |
| Backup Jaws | N/A |
| Jaw/Die Series | N/A |
| Torque / Turns | |
| Hydraulic Load Cell Assembly (Load cell + Hose + Gage) |
SM85-40-T |
| System Arm Length (in) (T) = Tong (B) = Backup |
40" (T) |
| WINCATT | |
| Turns Ratio (see note 1) |
0.064583333333 |
| Encoder Mount | 55142 |
| Encoder (Pulses per revolution of encoder shaft) |
60-0068 (100) |
| Proximity Switch | |
| CPT (Counts/Turn) of Rotary Gear Based on > 1000 PPT |
3300 |
| LC/SH Combo. | MHA-030 |
| Spring Hanger | SH-030 |
| Lift Cylinder | LCR-045 |
| Valve Layout (Order of valve function from left to right as viewed by operator) |
No Valves Included |
| Notes: |
| 1 - Ratio of One full rotation of Rotary Gear to number of rotations of encoder shaft |
| 1:XX (A) = Rotary Idler, encoder mount, 6 tooth rubber gear |
| 1:XX (B) = Pinion |
| 1:XX (C) = SL4500 - Reduction Gear, encoder mount, 12 tooth steel gear" |