80-1001-29 KT14-75K Drawing
- Version
- Download 1906
- File Size 785.93 KB
- File Count 1
- Create Date February 7, 2018
- Last Updated February 14, 2018
80-1001-29 KT14-75K Drawing
| General Size | 14" |
| Max Torque | 75000 ft.lb. |
| Tong Type | KT14-75K |
| Top Level P/N | 80-1001-29 |
| General Configuration Description | Tong + Lift Section + Closed Center |
| Weight | 3300 lbs |
| Tong Jaws | 4-1/2 To 14-3/8 |
| Jaw/Die Series | 1393-JDK-xxx |
| Backup Jaws | - |
| Jaw/Die Series | - |
| Torque / Turns | |
| Hydraulic Load Cell Assembly (Load cell + Hose + Gage) |
10-0041T-2 |
| System Arm Length (in) (T) = Tong (B) = Backup |
45" (T) |
| WINCATT | |
| Turns Ratio (see note 1) |
1:14.83 (A) |
| Encoder Mount | |
| Encoder (Pulses per revolution of encoder shaft) |
60-0068 (100) |
| Proximity Switch | |
| CPT (Counts/Turn) of Rotary Gear Based on > 1000 PPT |
1483 |
| LC/SH Combo. | MHA-060 |
| Spring Hanger | SH-060 |
| Lift Cylinder | LCR-045 |
| Valve Layout (Order of valve function from left to right as viewed by operator) |
Motor-Lift |
| Notes: |
| 1 - Ratio of One full rotation of Rotary Gear to number of rotations of encoder shaft |
| 1:XX (A) = Rotary Idler, encoder mount, 6 tooth rubber gear |
| 1:XX (B) = Pinion |
| 1:XX (C) = SL4500 - Reduction Gear, encoder mount, 12 tooth steel gear" |